K7T266 Pro (Standard Version)

 
K7T266 Pro-R (ATA RAID)

 
K7T266 Pro-RU (ATA RAID, USB 2.0)


 


CPU

Support Socket A for AMDR Athlon? / Duron? / Athlon? XP Processors
Supports 600MHz ~ 1.4GHz processor
Supports Athlon? XP 1500+ ~ 2000+ Processors


Chipset

? VIAR VT8366 (552BGA) Chipset
  - FSB @ 200/266MHz
  - AGP 4x and PCI Advanced high performance memory controller

? VIAR VT8233 (376BGA) Chipset
  - High Bandwidth Vlink Client controller
  - Integrated Faster Ethernet LPC (Optional CNR card support)
  - Integrated Hardware Sound Blaster/Direct Sound AC97 audio
  - Ultra DMA 33/66/100 master mode PCI EIDE controller
  - ACPI


FSB

? Supports 100/133(200/266)MHz FSB


Main Memory

? Support six memory banks using three 184-pin DDR DIMM.
? Support a maximum memory size up to 3GB.
? Supports 2.5v DDR SDRAM DIMM


Slots


? One CNR (Communication Network Riser).
? One AGP (Accelerated Graphics Port) or AGP Pro slot.
  Note : AGP Pro only for K7T266 Pro-R
  - AGP specifcation compliant.
  - Support AGP 2.0 1x/2x/4x
? Five 32-bit Master PCI Bus slots.
  - Supports 3.3v/5v PCI bus Interface.


On-Board IDE


? An IDE controller on the VIA VT8233 chipset provides IDE HDD/CD-ROM with PIO, Bus Master
  and Ultra DMA 33/66/100 operation modes.
? Can connect up to four IDE devices.


Audio

? Chip integrated (2 channel S/W audio)
  - Direct Sound AC97 Audio


Promise 20265R On-Board

? Support IDE RAID 0 or 1
  - can connect a Master and a Slave drive to each IDE RAID connector. The two connectors
    support hard disk drives only.
*Note: only the two Master Hard Disk Drives will adopt RAID function


USB Interface

? USB 2.0 HC On Board
  - Support 4 USB 2.0 ports via extemal bracket

? USB PC2PC Networking Function
  - Controlled by USB PC2PC Controller
  - Supported by the JUSB2 pin header

? 6 USB Ports
  
- Controlled by VT8233 Southbridge
  - 2 rear ports and 4 port supported by JUSB2 & JUSB3


On-Board Peripherals

? On-Board Peripherals include:
  - 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88M bytes.
  - 2 Serial ports (COM A+COM B)
  - 1 Parallel port supports SPP/EPP/ECP mode
  - 1 IrDA connector for SIR/ASKIR/HPSIR
  - 1 Audio/Game port


BIOS

? The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and
   expansion cards of the board automatically.
? The mainboard provides a Desktop Management Interface(DMI) function which records your
   mainboard specifications.


Dimension

? 30.4 cm(L) x 23.5 cm(W) ATX Form Factor

Mounting

? 6 mounting holes.